wwp@yahoogroups.com:
Re: Olympus entrance pupil is ??
Dave 360texas.com 2005-Aug-05 23:54:00
Follow up question:
If the measurement is from the front as shown in your diagram.. is
that starting point.. TOP of Glass or metal rim edge? Each millimeter
is important for determining the exact Entrance pupil or Nodal point
position.
Dave
--- In #removed#, "Dave 360texas.com" <#removed#> wrote:
> So is your final measurement in millimeter measured from the front
> of the lens back towards the camera body or from the film plane/CCD/
> CMOS forward?
>
> Only a question on the matter.
>
<snip for space>