wwp@yahoogroups.com:
Re: Cube face size
Jeff Pelletier 2004-Sep-30 17:19:00
I tend to export everything at about 1216 pixels. I typically only do a
Large version at ?High Quality? JPEG compression ? For the smaller version
on this project I used the same resolution at a ?Normal? JPEG compression..
Or maybe it was slightly below that. Using an 18mm (23ish 35mm equivalent)
means I end up with quite a bit of paralaxing, so I tend to do a lot of
photoshopping which is easier at a lower resolution.. Seems to look okay.
--
Jeff Pelletier
Basetwo Media
401-100 W Pender St., Vancouver BC
p: 604.681.4995 / f: 604.739.4613
http://www.basetwomedia.com
> --- In #removed#, Roger Howard <#removed#> wrote:
>> > What are folks using for typical cube face sizes? My standard is 2000
>> > pixels for large panos, 1200 for the small version. I'm thinking I can
>> > get away with much less on both.
>> >
>> > Thoughts?
>> >
>> > roger howard
>> > email & im @ <#removed#>
>> > photos @ <http://www.pbase.com/rogerhoward>
>
[Non-text portions of this message have been removed]