wwp@yahoogroups.com:
Re: banding problems
Pajuaba Gmail 2007-Mar-27 20:17:00
You can decrease the size of the source file, and apply a higher jpeg
quality. What causes the banding is the compression on the conversion
step; if the file size is smaller there will be less need to compression.
Hope this helps,
Rodolpho Pajuaba
Norman Shapiro escreveu:
> I'm working on my Atmosphere project and have run into a problem,
> which might be banding, in the sky of my small pano. When I set the
> jpeg setting in cubic converter low enough to get the size correct I
> get banding in the sky. A higher jpeg setting and the banding goes
> away. I've resized my PSD for the small pano to 3216X1608 before I go
> into Cubic Converter.
>
> With my full screen pano I have to use a jpeg setting that gets rid of
> the banding but then the pano is just barely small enough to submit.
>
> On the small pano I cannot adjust cubic converter between from 35% to
> low-if I could set it somewhere inbetween it might be ok. At 35% jpeg
> setting my pano is 900kb and does not have banding. At low jpeg
> setting I have banding.
>
> Any suggestions?
>
> tia-Norm Shapiro